How To Build A 2x4x8 Raised Garden Bed

Raised Garden Bed made from 2x4s Plans

Raised Garden Bed made from 2x4s Plans HTS

This step by step woodworking project is about wooden raised garden bedmade from 2x4s plans. I have designed this 4'x6′ raised garden bed so you can build it entirely with 2x4s. I would recommend you to stay away from pressure treated lumber, as it will have a negative impact of the plants health. If you have a higher budget, invest in weather resistant lumber. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting.

Made from this plan

Raised garden bed – Video

Raised Garden Bed made from 2x4s Plans

Building a raised garden bed

Materials

A – 8 pieces of 2×4 lumber – 48″ long, 8 pieces – 69″ long SLATS
B – 8 pieces of 2×4 lumber – 14″ long BRACES
C – 2 pieces of 2×4 lumber – 52 1/2″ long, 2 pieces – 76″ long TRIMS

16 pieces of 2×4 lumber – 8′
2 1/2″ screws
3 1/2″ screws
stain
wood filler , wood glue
landscape fabric

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Weekend

How to build a square planter box from 2x4s

Assembling the frames

The first step of the project is to build the frames for the raised garden bed. Cut the slats from 2×4 lumber at the dimensions shown in the plans. Align the edges and make sure the corners are square. Drill pilot holes and insert 3 1/2″ screws to lock the frames together tightly.

Staking the frames together

Stack the frames on top of another, as shown in the diagram. Align the edges with attention. Make sure the location of the raised garden bed receives a lot of natural light and level the surface with attention.

Fitting the exterior supports

Next, attach the supports to the exterior of the garden bed. Clamp the supports to the garden bed, drill pilot holes and insert 2 1/2″ screws to lock them into place tightly.

Fitting the top trims

The next step of the project is to attach the decorative trims. Use 2×4 lumber for the trims and make 45 degree cuts at both ends. Lay the trims to the top of the garden bed and secure them into place with 2 1/2″ screws.

Raised Garden Bed made from 2x4s Plans HTS

Raised Garden Bed made from 2x4s Plans

Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain over the exterior of the planter box. Make sure the products are non toxic. If you don't use weather resistant lumber, staple landscape fabric to the interior of the garden bed.

2x4 Raised Garden Bed Plans

2×4 Raised Garden Bed Plans

Add hooks and other accessories to the garden bed to make the most of it. Fill the garden bed with soil. If you like my project, don't forget to SHARE it on Facebook and Pinterest. See all my planter projects HERE!

Get PDF Plans

Thank you for reading our project about raised garden bed made from 2x4s plansand I recommend you to check out the rest of the projects. Don't forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.